Server Settings

To setup the server settings click on the 'Server Options' link in the Quick Links area of the main GUI (as shown below). The server options can also be accessed by going to the 'Options' menu and choosing 'Server Options' from there.

Once the link has been clicked the following window will open:

On the left hand side of this window there is a summary of the current settings for both the HTTP Server and the Agent Server. On the right hand side is the settings area.

For both the HTTP Server and the Agent Server the IP address, port number and the username have to be chosen. For the IP address just select the IP wanted from the drop down menus and type in the port number required too. To change this click the 'Change Password...' button; a standard password change dialog box will pop up.

The password for both servers is to ' hello ' by default. It is recommended that this is changed as soon as possible.

Once the settings are chosen start the servers; this can be done by clicking the 'Start' buttons under both the HTTP Server and Agent Server areas. The screenshot above shows 'Stop' buttons as the servers are already started. If the settings were changed whilst the servers were running then restart them for the settings to take effect.